How to use scantool.net v1.13 to diagnose your car's problems
If you have a car that is compatible with OBD-II (On-Board Diagnostics II), you can use a software called scantool.net v1.13 to read and clear the trouble codes from your car's computer. This can help you identify and fix the problems that cause the check engine light to come on, or improve your car's performance and fuel efficiency.
scantool.net v1.13
Download Zip: https://maudaracte.blogspot.com/?file=2tFYdh
Scantool.net v1.13 is a free software that works with a variety of OBD-II interfaces, such as ELM327, OBDLink, OBDKey, and more. You can download it from https://www.scantool.net/downloads/ and install it on your Windows PC. You will also need an OBD-II cable or adapter to connect your PC to your car's OBD-II port, which is usually located under the dashboard.
Once you have everything set up, you can launch scantool.net v1.13 and select the interface and the protocol that match your car's specifications. You can find this information in your car's manual or online. Then, you can click on \"Connect\" and wait for the software to establish communication with your car's computer.
After that, you can access various features of scantool.net v1.13, such as:
Reading and clearing trouble codes: This will show you the codes that indicate what problems your car has detected, and allow you to clear them after fixing them or resetting the computer.
Viewing live data: This will show you real-time information about your car's sensors, such as engine speed, coolant temperature, oxygen sensor readings, and more.
Recording and playing back data: This will let you save and review the data from your car's computer for later analysis or comparison.
Performing tests: This will let you run some diagnostic tests on your car's components, such as fuel system, evaporative system, oxygen sensors, etc.
Scantool.net v1.13 is a powerful and easy-to-use software that can help you diagnose and fix your car's problems. However, it is not a substitute for professional advice or service. If you are not sure what the codes mean or how to fix them, you should consult a qualified mechanic or technician.
In this article, we will show you how to use scantool.net v1.13 to read and clear the trouble codes from your car's computer. We will use an example of a car that has a code P0171, which means that the fuel system is too lean.
Step 1: Connect your PC to your car's OBD-II port
First, you need to connect your PC to your car's OBD-II port using an OBD-II cable or adapter. Make sure your car's ignition is on, but the engine is not running. Then, launch scantool.net v1.13 and select the interface and the protocol that match your car's specifications. For our example, we will use an ELM327 interface and an ISO 9141-2 protocol. Click on \"Connect\" and wait for the software to establish communication with your car's computer.
Step 2: Read the trouble codes
Next, you need to read the trouble codes from your car's computer. Click on \"Trouble Codes\" and then on \"Read Codes\". The software will display the codes that are stored in your car's computer, along with their descriptions and status. For our example, we see that there is one code: P0171 - System Too Lean (Bank 1). This means that the air-fuel ratio in the engine's cylinder 1 is too high, which can cause poor performance, high emissions, or damage to the engine.
Step 3: Clear the trouble codes
After you have identified and fixed the problem that caused the code, you can clear the code from your car's computer. Click on \"Trouble Codes\" and then on \"Clear Codes\". The software will ask you to confirm that you want to clear the codes. Click on \"Yes\" and wait for the software to erase the codes from your car's computer. You can then verify that the codes are gone by clicking on \"Read Codes\" again.
Step 4: View live data
Finally, you can view live data from your car's sensors to check if everything is working properly. Click on \"Live Data\" and then on \"Select Items\". The software will show you a list of available data items that you can view. You can select or deselect the items that you want to see by clicking on them. For our example, we will select \"Short Term Fuel Trim (Bank 1)\" and \"Long Term Fuel Trim (Bank 1)\". These are the values that indicate how much the fuel system is adjusting the air-fuel ratio to keep it optimal.
Click on \"Start\" and wait for the software to display the live data in a graph or a table format. You can also change the display mode by clicking on \"Graph\" or \"Table\". For our example, we see that both short term and long term fuel trims are close to zero, which means that the fuel system is not making any significant adjustments to the air-fuel ratio. This indicates that the problem that caused the code P0171 has been fixed. 06063cd7f5
https://www.playdarts.be/group/playdarts/discussion/cd39f5bf-74fd-4704-9bb1-421476092ed6
https://www.springadv.com/group/mysite-231-group/discussion/8b1e43aa-6cd7-4005-8e65-84169d67fbca